admin

05.07.2017 News

Application of Inspection port

In this month’s issue we would like to let you all know about the inspection ports. At various points throughout the dewatering zone on the cylinder we have made significant changes to the assembly. There are two part fixed rings incorporated to the design. The way these have been developed allows us to open and remove part of the fixed thus allowing us to see inside the cylinder and assess the condition of the screw

Please have a look at the following pictures.

 

  

 

The part marked in red circle in the photo above is half fixed ring and inspection port. Half fixed rings are put in left picture (normal state) and removed in right one.

The purpose of attachment of half fixed ring is to allow us to assess the condition of the screw without actually having to strip the unit down.

Another benefit of this is if the unit has been overloaded and become clogged, we can actually open the inspection and remove the excess sludge still inside the cylinder

In case that clogging happens because of changing of sludge concentration, it is possible to scrape sludge stuck to screw and splash water on hardened sludge through the inspection port by removing half fixed ring. The scraper for removing sludge is attached tool. (this is called “MITSUHARU”, the name of inventor of scraper)

 

    

 

Since half fixed ring was introduced in VOLUTE™ , many users have said that the operation has become easier. We are glad they were happy with that.

 

If these fixed rings are not incorporated in VOLUTE™ installed in your plant, it is possible to attach half fixed rings in next replacement of cylinder. So if you want, please don’t hesitate to contact us.

28.02.2017 News

The replacement parts for VOLUTE™

Amcon has reached over 3000 installations in 67 countries, 6 continents across the globe.

In order to ensure that the VOLUTE™ dewatering press operates to the best possible standard, we would like to advise you about the consumable parts.

VOLUTE™ dewatering press has two consumable parts that in time will need to be replaced: 1. Moving Rings in dewatering zone(s) and 2. V-screw(s). When you feel that the throughput has dropped or the dry solid content has decreased, please check the hours displayed on the cumulative operation timer.

 

Moving Rings in Dewatering zone Screw
Model 100~130 5000 hours 10000 hours
Model 200~400 10000 hours 30000 hours

※This life span is just a reference. The life span will be based on the sludge type and setting of the operation.

There is another way to check if it is time to replace the parts.

You only have to look at the dewatering zone and see whether the rings are moving or not.

 

   
When the rings are moving When the rings are not moving

 

If you feel it is time to replace the parts please contact our partner who you have bought our VOLUTE™ dewatering press and advise them of the operating hours on the cumulative operation timer.

15.12.2016 News

Seasons greetings 2016

Dear customers and partners,

We would like to offer our warm greetings this winter season and wish you a happy end of the year 2016!

 

We would also like to announce that our offices will be closed from 23rd of December 2016 until 2nd January 2017.

 

We are looking forward to future cooperation in the next year!

 

signature-banner

01.11.2016 News

AMCON Europe at BrauBeviale 2016 in Nuremberg

AMCON is proud to be exhibiting its latest VOLUTE™ Dewatering Press, the innovative sludge dewatering press at BrauBeviale Exhibition in Nuremberg, Germany.

Please visit our stand 6-445 in Hall 6.

Our sludge treatment experts will share our latest references and developments. Please take this great opportunity!

 

 

brau

01.03.2016 News

The Inaugural Annual AMCON Conference 2016

  • We here in AMCON are very proud to have hosted the first ever annual AMCON Conference for our colleagues, partners and clients between the 22nd  February and the 25th February.  It is a big step forward for us as a company, but also as we believe for our partners and the sludge dewatering industry. 

    These couple of days were filled with presentations and debates about how we can provide better, more innovative, convenient and tailor-made technology and service for our customers around the world.

    We spoke about present and future upgrades to the Volute Dewatering Press – the new inspection ports, Siemens panels and others. Another segment dealt with servicing our technologies and offering service packs to our customers – guaranteeing years of regular maintenance and overhaul servicing of Volute but above all providing an even more care-free operation to our customers. Among other things, we talked about the possibilities of providing different solutions – like package plants, mobile, skid-mounted or containerized units.

     

    We were joined by two guest speakers, CEO Alexey Yuskin from Eco Potential Ltd., who told us about the market in Russia and Managing Director Dave Garton from ATANA Ltd., who spoke about polymers and the partnership between chemicals and engineering.

     

    We not only managed to learn a lot, but also had quite a bit of fun during our International Bowling Competition. Our winners were: 1st place T&A Mämmelä/ Pöyry from Finland, 2nd place EVH from Slovakia and 3rd place was taken by Evergreen Engineering from the Republic of Ireland (second and third place were actually tied, so the fastest finished received second place).

     

    We are looking forward to a very successful year and many similar future events!

     

    Thank you to the attendees from all 18 countries, who made this possible!

For more photos from the event, please visit our photo album on Google+ here! (https://plus.google.com/+Amcon-eu/posts/7EU9bScPxK2)

 

AMCON Europe Inaugural Annual Conference attendees, Volute Dewatering Press

AMCON Europe Inaugural Annual Conference attendees.

 

07.01.2016 News

Happy New Year from AMCON Europe!

We here at AMCON wish everyone a successful year 2016!

Thank you for your continued support and cooperation and we are looking forward to working with you in the future!

Your  AE Teamkingwood-town-center-july-4th-festival-and-fireworks-houston-tx

07.01.2016 News

Notice of office address change

  • We would like to announce a regulatory change of address of our Prague office to:

    Za Tratí 207,

    252 19 Chrášťany,

    Praha-západ, Czech Republic

     

    Please note, that this change is due to a new street name. Our offices have not been relocated.

    In case of any questions, please do not hesitate to contact us. Thank you for your understanding and sorry for any inconveniences!

    AE Team

16.10.2015 Event

AMCON presents the VOLUTE™ Dewatering Press at Aquatech (Amsterdam) 3. – 6. November

AMCON is proud to be exhibiting its unique sludge, award-winning dewatering press, VOLUTE, at this year’s Aquatech in Amsterdam from 3rd of November until the 6th of November.

 

It is here, where we will be displaying the skid mounted VOLUTEDewatering Press ES-131-SA-CE with Polymer dosing unit and Sludge feed pump. Your all-in-one solution for the most popular small capacity model!

Our sludge treatment experts will also share our latest references and developments.

Please take this great opportunity to visit us!

 

OUR STAND:

Hall 7, Stand 575

 

For more information about the event, please go here.

 

aquatech signature

 

22.09.2015 News

Our partner presents VOLUTE™ at WEFTEC 2015, USA

Our partner (Process Wastewater Technologies) is proud to be exhibiting VOLUTEat ” WEFTEC 2015 ”, which will be held in Chicago , USA from September 28, 2015.

VOLUTEDewatering Press ES-353  model   will be exhibited and they will introduce you to our products.

Please do not miss this great chance to see VOLUTEDewatering Press ES-353 in person.

We are looking forward to seeing you at our booth!

 

【Information about WEFTEC 2015】

Location : McCormick Place • 2301 S. Lake Shore Drive • Chicago, Illinois 60616

Date : September 28-30, 2015

Booth Number :2002

 

More information about WEFTEC 2015 is here.

05.08.2015 News

The latest VOLUTE™ Dewatering Press reference – car wash sludge

VOLUTEDewatering Press demonstrates its versatility in our latest reference, this time dewatering sludge from various car and truck washes from around the Czech Republic.

 

For more information about this installation please see the reference sheetor contact us directly to get more information about VOLUTEor to inquire about further references.
Car wash sludge reference in Czech Republic

 

14.07.2015 News

AMCON Europe contributes to keep aquabellas afloat

Helping our local community is something that we are proud we can do!

When a local swimming club bringing together children between the ages 7 – 17 with a passion for sport asked AMCON Europe for funding, we gladly helped the youngsters pursue their passion.

aquabellas training

29.05.2015 News

Impressions from the VOD-KA Exhibition in Prague, 19. – 21.5.2015

Amcon Europe has been exhibiting the VOLUTE™ Dewatering Press for the second time at the VOD-KA Exhibition in Prague this year and we are glad that this year brought more visitors to the event as well as to our stand. The VOD-KA exhibition is an event aimed at water supply and sewage and technologies and services in this field. And that is why being present is a priority to us.

 

Our exhibition area and a more sophisticated design of the stand were a benefit to our visitors and a very effective move for us as well. In the field of sludge dewatering in the Czech Republic is VOLUTE™, the self-cleaning sludge treatment technology with low operational costs and easy maintenance, quite a new and unexplored solution. We had the following models on display on VOD-KA:

 

Richard and Jan at VODKA presenting the VOLUTE™ Dewatering press

Richard Beagrie and Jan Václav at the AMCON Europe stand at VOD-KA 2015.

 ♦ ES-051 – the smallest dewatering machine in the world, one that attracted the attention of many visitors. It is suitable for small waste water treatment plants with PE 50 to 500.

 

♦ EC–201 – a model from this year’s newest EC series, where a conditioning tank has been added in order to reach the highest quality of filtrate after dewatering. It rightfully earned the enthusiasm of visitors and offers for immediate purchase during the event. The PE of this model is 3000 to 6000.


♦ ES-351
– The model with the highest cylinder diameter (350mm) in our supply. It is suitable for average to large waste water treatment plants with PE up to 30 000 and it is also suitable for industrial WWTPs with a higher concentration of oil in the sludge, thanks to its self-cleaning construction

 

Based on affirmative reactions we can say, that also our new range of service packs (regular inspections, maintenance, sludge cake analysis, etc.) and post-warranty service will find its place in the market and WWTP owners and operators have very positively taken notice of this expansion of our offered services.

 

We are very satisfied with this year’s VOD-KA Exhibition and we are already looking forward to next year!

Many thanks to all our visitors, we are looking forward to our future cooperation.

Jan Václav