Dewatering press MS series comply with the standard specification of “Multi disc-type screw press dewatering equipment,” published as a part of machinery and equipment of the standard specifications of the Japan Sewage Works Agency.
The direct dewatering of sludge from oxidation ditch was established by joint research of the Japan Sewage Works Agency and AMCON, in 1998.

MS series

Japan Sewage Works Agency standard specification
Specifications List
Model | Throughput (kg-DS/h) | Dimensions (mm) | Total Power Consumption (kW) | Weight (kg) | |||
---|---|---|---|---|---|---|---|
L | W | H | Empty | Operation | |||
MS-201 | 6 to 8 | 2650 | 1400 | 2095 | 1.9 | 930 | 2200 |
MS-202 | 12 to 16 | 2650 | 1700 | 2095 | 2.1 | 1230 | 2700 |
MS-203 | 18 to 24 | 2650 | 2000 | 2095 | 2.8 | 1530 | 3300 |
MS-204 | 24 to 32 | 2750 | 1800 | 2095 | 3.7 | 2000 | 3500 |
MS-205 | 30 to 40 | 2750 | 2100 | 2095 | 3.9 | 2300 | 4100 |
* Throughput is based on the standard value of the sludge concentration with TS 0.2% to 0.4%, and the water content of dewatered cake being 83% by adding Polyferric sulphate and ampholytic polymer.
* Throughput above is calculated as approximate and may vary depending on sludge condition. For model selection, please contact us.
* Throughput above is calculated as approximate and may vary depending on sludge condition. For model selection, please contact us.