The smallest mechanical dewatering press in the world

ES-051 will provide economic benefits where sludge disposal cost or transportation cost is exceptionally high due to remoteness of the facility where wastewater is produced, such as cottages, military camps, etc.

Specifications List

Raw Wastewater / Waste Activated Sludge /
Chemically Precipitated Sludge
Flotation Sludge
Mixed Raw Sludge /
Aerobic Digested Sludge
(Sewage Sludge)
ES-051up to 0.5kg-DS/h
(up to 0.25m3/h)
up to 1kg-DS/h
(up to 0.1m3/h)
up to 2kg-DS/h
(up to 0.1m3/h)
up to 4kg-DS/h
(up to 0.08m3/h)
up to 5kg-DS/h
(up to 0.17m3/h)
ModelDimensions (mm)Total Power
Consumption (kW)
Weight (kg)

* Throughput above is calculated as approximate and may vary depending on sludge condition.

For model selection, please contact us.

* Throughput of each model is based on sludge cake with solid content higher than 15%.

* There is no certain upper limitation on inlet sludge concentration, however, the target sludge must be flowable.

* Throughput of DAF Sludge is based on sludge contatining much fat, oil, and grease such as meat processing applications etc.

* Throughput of Mixed Sludge (Primary Sludge and Waste Activated Sludge) and Aerobically Digested Sludge is based on
sludge containing 20% fi­ber (150 micron mesh clearance) against Total Solids.

Case studies